Skip survey header

MicroStation V8i (SELECTseries 3) Essentials

Working With Existing Elements

Complete the assessment to see what you have gained from completing this module.

1. The task containing Copy, Move, Rotate, Scale, etc is called the:
2. The Element Selection or Place Fence tools are used to allow operations on multiple elements.
3. Which method is best for patterning an area made up of multiple elements?
4. You can select multiple elements AFTER choosing a manipulation tool.
5. Fence modes, such as Inside, Void, etc now:
6. The result of the Measure Distance tool:
7. Scale, Rotate and Mirror can be done about the center of each element.

8. Open the file MicroStation_Essentials_V8i.dgn and open the model: Modifying Existing Elements Challenges.  Place a circle with a radius of two (2) at the end of the line string as shown below. 


Use Construct Array with the method set to Along Path and the mode set to Distance.  Use a distance of 14.25 and copy the circle you just drew along the entire line string (from one endpoint to the other).  How many circles do you have (including the first one you drew)?
0%