A+ Practice Quiz: 220-1001 Quiz 13

1. You just purchased an iPad tablet device. You want to synchronize your photos, music, email, and contacts from your Windows 10 PC to the device. How can you connect the device to the PC? (Choose TWO; each option is a complete solution)

• Wi-Fi wireless connection
• Firewire cable
• Serial cable
• Ethernet wired connection
• USB cable

2. A technician has configured a client computer's network interface to request an IP address. Which of the following TCP/IP suite protocols does the client use to perform the request and a server use to offer an IP address?

• Lightweight Directory Access Protocol (LDAP)
• Dynamic Host Configuration Protocol (DHCP)
• Simple Network Management Protocol (SNMP)
• Domain Name System (DNS) Protocol

3. Which of the following correctly describe the most common format for expressing IPv6 addresses? (Choose TWO)

• Binary numbers
• Decimal numbers
• 128 numbers, grouped using colons
• 32 numbers, grouped using colons
• Hexadecimal numbers

4. Which two of the following describe an IPv6 address? (Choose TWO)

• 32-bit address
• Four decimal octets
• 128-bit address
• 64-bit address
• Eight hexadecimal quartets

5. The marketing department has hired a new employee. Prior to the new employee's first day at work, you have set up and configured a new laptop computer.

The computer and all of the peripherals were purchased from the same vendor. After the new employee begins work, you receive a phone call stating that the wireless mouse is not working.

Which of the following is the MOST likely reason the mouse isn't working?

• The USB mouse receiver is not plugged into the computer.
• The USB mouse is malfunctioning.
• The USB mouse driver is too old for the current mouse.
• The USB mouse is not a wireless mouse and needs to be plugged into the computer.

6. Susan works in the research and development department. She has recently purchased a large high-speed external drive and has attached the drive to her computer using a USB cable. Her drive requires a minimum bandwidth of 400 Mbps and at least 900 milliamps (mA) to function.

Although the correct drivers are installed, the drive is not functioning. To troubleshoot the problem, she has connected her drive to her coworker's computer where the drive functions properly. No additional cables are required for this drive.

Which of the following is the MOST likely reason Susan's external hard drive is not working?

• Susan has connected her drive to a USB 3.0 port, which does not have enough power for her drive.
• Susan has connected her drive to a USB 3.0 port, which does not support the maximum bandwidth required.
• Susan has connected her drive to a USB 2.0 port, which does not support the maximum bandwidth required.
• Susan has connected her drive to a USB 2.0 port, which does not have enough power for her drive.
• Susan has connected her drive to a USB 3.0 port, but the drive is only made to work with a 2.0 port.

7. Which of the following printers would produce the highest print quality?

• 18-pin
• 300 DPI
• 24-pin
• 600 DPI

8. You replaced the print cartridge on an inkjet printer. Which of the following BEST describes the next step you should perform?

• Send the printer to the factory for a realignment.
• Calibrate the printer.
• Replace the ribbon.
• Replace the fuser roller assembly.

9. You have just finished upgrading the CPU in your desktop system. After running for about 15 minutes, the system spontaneously shuts down. Which steps should you take to begin troubleshooting the issue? (Choose TWO)

• Check the CPU fan power.
• Check the power supply voltage switch.
• Remove any unnecessary components and run the system.
• Replace the power supply.
• Check the thermal shutdown threshold in the BIOS.

10. You work at a computer repair store. You just upgraded the processor (CPU) in a customer's Windows-based computer. The customer purchased the latest AMD Phenom II processor, and you installed it in the computer. When you power the computer on, you only see a blank screen.

Which of the following is MOST likely causing the computer displaying a blank screen? (ChooseTWO)

• The heat sink and fan were not installed correctly.
• The CPU is not supported by the BIOS.
• The power connector for the fan was not connected to the motherboard.
• The CPU is bad.
• Someone unplugged the computer without performing a proper shutdown first.